Repair Tips From Japan CS centre

 
Model Block Function Symptoms Cause Repair performed
MZ-R30 #25 Main Board No PlAy & REC button C834 Short-circuit Replace C834
MZ-R30 #25 Main Board No Power and "lOW BAtt" Indicated IC805 Short-circuit Replace IC805
MZ-R30 #25 Main Board No Digital Recording R307 Cold Solder Re-solder
MZ-R30 #25 Main Board No Recording C501 Failure Replace C501
MZ-R30 #25 Main Board No Sound from lINE OUt & HP lch C123 Failure Replace C123
MZ-R30 #25 Main Board No Power C816 Short-circuit Replace C816
MZ-R30 #12 JOG SW Unit with Dial Mis-operation of Control Button Corrosion in Flexible Board Pointed End Replace Switch Unit
MZ-R30 MCB Main Board No Recording IC506 Soldering Delaminated Re-solder
MZ-R30 #12 MD Flexible Board No Power and "lOW BAtt" Indicated MD Flexible Board Disconnected by Friction from Reinforcement Board's Edge Stick a Protection Sheet(or tape) in a Position of MD Flexible Board that May Be Damaged by Reinforcement Board.
MZ-R30 MCB Main Board No Power and "HI DC IN" Indicated IC801 Failure Replace IC801
MZ-R30 MCB Power Board Volume Uncontrollable SW Board Failure Replace SW Board
MZ-R30 MD Section lCD Repeating Mode Uncontrollable lCD Module Failure Replace lCD Module
MZ-R30 MD Section Fulcrum Board Ass'y No Reaction & No Power Fulcrum Board ASS'y Bent(S817 OPEN/ClOSE Switch is Unable to Press) Replace Fulcrum ASS'y(or Repair)