|
Current page: 14 |
|
- When a sound, such as a person speaking, is picked up by the microphone, recording will begin automatically.
- If a silence lasts for 3 seconds or more, the recording will be paused automatically. However, the unit will not pause for about the first 10 seconds after recording has started.
To interrupt a synchro recording:
Press the button while recording.
- The Mic synchro recording mode will be canceled, and the unit will enter the recording stand-by mode.
- To resume synchro recording, press the ENTER/F.PLAY/SYNCHRO button again.
To stop recording:
Press the /:OFF button.
Recording from the microphone (Mic manual recording)
- You can start recording manually (any time you like).
- Put the unit in the recording stand-by mode. (Perform steps 1 - 4 in the "Mic synchro recording" section.)
- Press the button.
To Interrupt a recording:
Press the button while recording.
- The unit will enter the recording stand by mode.
- To resume recording, press the button again.
The track number will be increased by one each time you
interrupt a recording.
To stop recording:
Press the /:OFF button.
Notes:
- If you want to use a microphone, be sure it is a plug-in power type microphone that can be powered by the main
unit.
- Insert the plug firmly. Otherwise, the recording will not be made properly.
- Use a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.
- When a recording is made using a stereo microphone (optionally available), an analog recording will be made.
- While making a mic recording, do not connect anything to the LINE IN jack on the main unit.
|
Current page: 14 |
|