Current page: 37

Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong with this product, check the following before calling your authorized SHARP dealer or service center.

PROBLEM CAUSE
The unit does not turn on.
  • Is the AC adaptor disconnected?
  • Is the battery exhausted?
  • Is the unit in the safety mode?
  • Has condensation formed inside the unit?
  • Is the unit being influenced by mechanical shock or by static electricity?
No sound is heard from the headphones.
  • Is the volume set too low?
  • Is the remote control unit or the headphones plugged in?
  • Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music?
When the operation buttons are pressed, the unit does not respond.
  • Is the unit in the safety mode?
  • Is the battery exhausted?
  • Is the remote control unit plug or the headphone plug inserted firmly?
Some sounds are skipped.
  • Is the battery exhausted?
  • Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected.
  • Has the track number or character information been written on the disc yet?
  • Is the unit in the recording or editing mode?
Recording and editing are impossible.
  • Is the MiniDisc protected against accidental erasure?
  • Is the unit connected properly to the other equipment?
  • Is the AC adaptor unplugged or did a power failure occur while recording or editing?
  • Is the unit in the safety mode?

If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or it it is operated incorrectly, it may malfunction. If such a problem occurs, do the following:

  1. Unplug the AC adaptor from the AC outlet.
  2. Remove the battery.
  3. Leave the unit completely unpowered for approximately 30 seconds.
  4. Plug the AC adaptor back into the AC outlet and retry the operation.
If strange sounds, smell or smoke come out of the unit or an object is dropped into the unit, remove the AC adaptor from the AC outlet immediately and contact an authorized Sharp service center.
Current page: 37